Equivalent Materials for Different Steel Products according to DIN/EN and ASTM/ASME
Manufacturing internationally can be difficult. Not only the language barrier can cause confusion. Also, common material standards often vary from country to country. While it is still possible to produce the same quality with materials following a different standard it is still necessary to use the right equivalent materials. Especially for steel materials, it is important to use the right equivalent material for DIN/EN and ASTM/ASME pipes, tubes, plates, sheets, round bars, flanges, fittings and so on.
On this page, we have listed the most common materials for which we often need the equivalent material. These are all materials with which we produce our heat exchangers, thermal oil heaters, boilers, piping systems, skid installations and more.
Carbon Steel | DIN / EN Designation | ASME Designation |
Pipes / Tubes | P235GH | A179 |
P265GH | A106 Gr. B | |
Sheet / Plates | S235J2 | A36 |
P355GH | A516 Gr. 70 | |
Round Bars | C45E | S45C |
Flanges | C22.8 | A105 |
Fittings | P265GH | A234 WPB |
Stainless Steel | DIN / EN Designation | ASME Designation |
Tubes / Plates | 1.4301 | 304 |
1.4828 | 309 | |
1.4845 | 310 | |
1.4404 | 316L |
Other Helpful Links for Equivalent Materials
For more thorough information on equivalent materials, the below links may be useful.
European Steel and Alloy Grades / Numbers Searchable Database
Here it is important that you type in the complete and correct material designation in order to find equivalent materials for all common international standards.
Material grade comparison table by DINANSI
Here you will find a quite complete table for the different materials according to DIN, EN and ASTM.
CONTACT
PT Maxxtec Teknologi Indonesia
ITC Permata Hijau, Lantai 3 C11 No. 16,
Jl. Arteri Permata Hijau, Kebayoran Lama,
12210 Jakarta Selatan
Indonesia
Telephone: +62-21-53670749
Service: +62-812-82506215
Email: teknologi@maxxtec.co.id